Ubuntu 触摸屏驱动问题

  • Post author:
  • Post category:其他



Xorg evdev

Evdev is the current way to set up a Elo touchscreen. See this blog post for instructions:

http://who-t.blogspot.fi/2012/07/elographics-touchscreen-setup.html




ELO Touchscreen Driver (using evtouch)

Ubuntu includes an Xorg xserver input driver in the package

xserver-xorg-input-evtouch

for Dapper, Feisty, Gutsy, Hardy, Intrepid, Jaunty, Karmic, & Maverick (for x86 and x86_64). This will work with many of the ELO touch-screen drivers, both serial and USB.

evtouch seems to work much better than elographics for jaunty, karmic, & Maverick




*** EVTOUCH DRIVER HAS BEEN REMOVED FROM UBUNTU STARTING AT VERSION 11.04 ***





Install Driver

sudo apt-get install xserver-xorg-input-evtouch

Configuration

Ubuntu 10.04 and 10.10

Do

NOT

edit

/etc/X11/xorg.conf

. All touchscreen configuration should be done by changing the appropriate .conf file in

/usr/[lib/share]/X11/xorg.conf.d/

.

In 10.10 they changed the location of the .conf files from /usr/lib… to /usr/share…




Check your device info:





lshal | grep Elo

Mine looks like this:













  info.vendor = 'Elo TouchSystems'  (string)
  usb_device.vendor = 'Elo TouchSystems'  (string)
  usb.vendor = 'Elo TouchSystems'  (string)
  info.product = 'EloTouchSystems,Inc Elo TouchSystems 2216 AccuTouch® USB Touchmonitor Interface'  (string)
  input.product = 'EloTouchSystems,Inc Elo TouchSystems 2216 AccuTouch® USB  Touchmonitor Interface'  (string)

Create a configuration file to match your device:

Ubuntu 10.10:

sudo nano /usr/share/X11/xorg.conf.d/69-evtouch.conf

Ubuntu 10.04:

sudo nano /usr/lib/X11/xorg.conf.d/69-evtouch.conf

My Elo 2216 configuration looks like this:

























Section "InputClass"
        Identifier "Elo class"
        MatchProduct "Elo TouchSystems"
        MatchDevicePath "/dev/input/event*"
        Driver          "evtouch"
 Option "minX" "530"  Option "minY" "570"  Option "maxX" "3500"  Option "maxY" "3500"  Option "swapY" "1" EndSection

You will need to adjust the screen calibration numbers (min|max)…I just played with them until it worked.

As you can see, I needed the swap Y axis enabled.

The

MatchProduct

should be something contained in the info.product section of the lshal output shown above.

I believe the devicepath is rather generic, but if it doesn’t work, search for input.device in this:










sudo lshal > text
gedit text


Good luck! – JM




Ubuntu 9.10 and earlier

Do

NOT

edit

/etc/X11/xorg.conf

. All touchscreen configuration should be done by changing the appropriate fdi file in

/usr/share/hal/fdi/policy/20thirdparty/

or creating your own.




Note:

It is possible to use xorg.conf but it’s redundant and I had a lot of freezing issues (e.g. X would freeze every 10 minutes) until I used this method.



If you have a 2700, then you can just edit

50-elo-2700.fdi





Note:

in version 0.8.8 the file

50-elo-2700.fdi

has an extra

</deviceinfo>

at the end which you must delete or it won’t work..



Otherwise run the following command to get information about your touchscreen:





lshal | grep Elo

To create a new fdi, run:



sudo nano /usr/share/hal/fdi/policy/20thirdparty/50-elo.fdi

Then add the following lines. You can change the line

<match key=”info.product” contains=”Elo

TouchSystems

“>

to match the output of

lshal | grep Elo

but ”

Elo

TouchSystems


” is pretty generic and should match any Elo touchscreen..



<?xml version="1.0" encoding="UTF-8"?> <!-- -*- SGML -*- -->
<deviceinfo version="0.2">
  <device>
    <match key="info.product" contains="Elo TouchSystems">
      <match key="info.capabilities" contains="input">
 <merge key="input.x11_driver" type="string">evtouch</merge>  <merge key="input.x11_options.minx" type="string">130</merge>  <merge key="input.x11_options.miny" type="string">197</merge>  <merge key="input.x11_options.maxx" type="string">3945</merge>  <merge key="input.x11_options.maxy" type="string">3894</merge>  <merge key="input.x11_options.swapx" type="string">1</merge>  <merge key="input.x11_options.swapy" type="string">1</merge>  </match>  </match>  </device> </deviceinfo>


Note

(on March 27th, 2010): In my case (ELO 2500u), the Y coordinates of my clicks were inverted. To fix that, replace:



        <merge key="input.x11_options.swapy" type="string">1</merge>

by:



        <merge key="input.x11_options.swapy" type="string">0</merge>

…End of note



The last thing you have to do is create udev rules so the the touchscreen can correctly send events.



Create the file

/etc/udev/rules.d/69-touchscreen.rules

and add the following lines:



# Elo Touchscreen
KERNEL=="event*", SUBSYSTEM=="input", ATTRS{idVendor}=="04e7", ATTRS{idProduct}=="0020", SYMLINK+="input/evtouch_event"

That’s it! You’ll probably have to modify the values for minx, maxx, miny, maxy to adjust calibration. If the calibration is inverted then change swapx or swapy to 0. You’ll have to log out and log back in for the changes to take effect. Or maybe restart or maybe unplug the usb cable and plug it back in..



You might be able to run the calibration utility from

System -> Preferences -> Calibrate Touchscreen

but I haven’t had any luck..




Note:

(on March 27th, 2010): If when calibrating you get the error message: “No evtouch capable touchscreen found.” It may mean that the vendor id –above is 04e7– or the product id –above is 0020– are incorrect. To get the correct values do the following:



sudo lshal > text
gedit text

Now on the text editor look for the string “ELO Touch”. The editor will bring you to the section where you can get the correct product id and vendor id. To give you an idea, I have an ELO 2500U and the text looks like the following in my machine, where my value for vendor id is 0x4e7 and product id is 0x7: (only the most relevant lines appear next)



udi = '/org/freedesktop/Hal/devices/usb_device_4e7_7_07G59809'
  usb_device.product = '2500U IntelliTouch® Touchmonitor Interface'  (string)
  usb_device.product_id = 7  (0x7)  (int)
  usb_device.serial = '07G59809'  (string)
  usb_device.speed = 12.0 (12) (double)
 usb_device.vendor = 'Elo TouchSystems' (string)  usb_device.vendor_id = 1255 (0x4e7) (int)  usb_device.version = 1.1 (1.1) (double)

…End of Note



ELO Touchscreen Driver (using elographics)

Ubuntu includes an Xorg xserver input driver in the package

xserver-xorg-input-elographics

for Dapper, Feisty, Gutsy, Hardy, Intrepid and Jaunty (for x86 and x86_64). This will work with many of the ELO touch-screen drivers, both serial and USB.

  • E271-2210 and E271-2200 devices are supported. E281-2310 and compatible devices are supported with some features unavailable.



Installation

sudo apt-get install xserver-xorg-input-elographics


Note:

Version 1.1.0-3 has

a bug that is triggered when axis minimum and maximum values are inverted

. Until the package is updated a patched version (1.1.0-3ubuntu1) is

available from my PPA

.



Configuration

Edit


/etc/X11/xorg.conf


and add a new

InputDevice

section similar to this one. This example comes from a screen test on a laptop that is configured so the external graphics device is on X screen 1 (note the

screenNo

option) rather than the default screen 0.



Section "InputDevice"
        Identifier "ELO Touchscreen"
        Driver     "elographics"
        Option     "Device"     "/dev/ttyUSB0"
        Option     "AlwaysCore"
 Option "screenNo" "1"  Option "MinX" "4100"  Option "MaxX" "0"  Option "MinY" "0"  Option "MaxY" "4100"  Option "UntouchDelay" "5"  Option "ReportDelay" "1" EndSection


Note:

edit the

Device

value (/dev/ttyUSB0) to match the input device name the touch-screen input has. In this case, the device is a serial touch-screen connected via a serial-to-USB converter.



  • You may have to invert the minimum and maximum X- and Y-scale values if the input values from the touch-screen are inverted.


    Use `man elographics” to see all the options and defaults.





Add the input device to the

ServerLayout

section so it looks similar to this:

















Section "ServerLayout"
    Identifier     "Default Layout"
    Screen      0  "Screen0" 0 768
    Screen      1  "Screen1" Above "Screen0"
    InputDevice    "Synaptics Touchpad"
 InputDevice "ELO Touchscreen" EndSection

Save the file and log-out to restart the X server.



Calibration

Manual calibration is required. It is a case of repeatedly changing the minimum and maximum X and Y axis values in xorg.conf, restarting and testing. An alternative is to build and then run

touchcal

from a non-X terminal to determine minimum and maximum values to use in xorg.conf.




CategoryXwindowSystem





EloTouchScreen (2012-09-28 14:05:15由


ville-ranki

编辑)

转载于:https://www.cnblogs.com/Dennis-mi/articles/5104794.html