博客

Switch>

Switch>en

Switch>enable

Switch#conf

Switch#configure

Configuring from terminal, memory, or network [terminal]?

Enter configuration commands, one per line.  End with CNTL/Z.

Switch(config)#h

Switch(config)#hostname SW1

SW1(config)#vl

SW1(config)#vlan 2

SW1(config-vlan)#exit

SW1(config)#in f0/1

SW1(config-if)#sw

SW1(config-if)#switchport m

SW1(config-if)#switchport mode a

SW1(config-if)#switchport mode access

SW1(config-if)#sw

SW1(config-if)#switchport a

SW1(config-if)#switchport access v

SW1(config-if)#switchport access vlan 1

SW1(config-if)#in f0/2

SW1(config-if)#sw

SW1(config-if)#switchport m

SW1(config-if)#switchport mode a

SW1(config-if)#switchport mode access

SW1(config-if)#sw

SW1(config-if)#switchport a

SW1(config-if)#switchport access v

SW1(config-if)#switchport access vlan 2

SW1(config-if)#in f0/3

SW1(config-if)#sw

SW1(config-if)#switchport m

SW1(config-if)#switchport mode t

SW1(config-if)#switchport mode trunk

SW1(config-if)#exit

SW1(config)#

%LINK-5-CHANGED: Interface FastEthernet0/3, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/3, changed state to up

Router>en

Router>enable

Router#conf

Router#configure

Configuring from terminal, memory, or network [terminal]?

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#h

Router(config)#hostname R1

R1(config)#in f0/0

R1(config-if)#no shu

R1(config-if)#no shutdown

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

R1(config-if)#in f0/0.1

%LINK-5-CHANGED: Interface FastEthernet0/0.1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0.1, changed state to up

R1(config-subif)#en

R1(config-subif)#encapsulation d

R1(config-subif)#encapsulation dot1Q 1 n

R1(config-subif)#encapsulation dot1Q 1 native

R1(config-subif)#ip add 172.16.1.1 255.255.255.0

R1(config-subif)#in f0/0.2

%LINK-5-CHANGED: Interface FastEthernet0/0.2, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0.2, changed state to up

R1(config-subif)#en

R1(config-subif)#encapsulation d

R1(config-subif)#encapsulation dot1Q 2

R1(config-subif)#ip add 172.16.2.1 255.255.255.0

R1(config-subif)#exit

R1(config)#